Product Categories



Hebei Huike Steel Pipes Co., Ltd

Factory Location:

Xiwang New District, Mengcun,

Cangzhou, Hebei, China.

Tianjin Branch Office :

B-607,Hi-tech Information Square,Huatian Road 8#,

Huayuan Industry Park,Nankai District,Tianjin City,China


Contacts:

Mr . Hiram

Tel:+86-22-58900156

Fax:+86-22-58900165

M.P:+86-13381183522

E-mail:lihm@huikepipe.com

Web:www.hksteelpipe.com



Home > News > Content
Why More And More Hot Line Pipe
- Aug 08, 2017 -

Why more and more hot Line Pipe
Now the Line Pipe is not only widely used is a lot of different models, in fact, we said that the line is through a number of specific processes after the steel pipe treatment, and then make the steel pipe can play a better anti-corrosion effect.
We can see a lot of old houses are a lot of heating is the application of the wire, but with the long time, and now rarely began to have a pipe is a pipe, and more is the use of gas and other pipelines, Line Pipe is not only very easy to repair, more resistant to impact, easy to damage, and the best is the line to prevent the interference of strong and weak, and very safe, because the wire to the ground, then leakage, etc. are protected The
But in fact for the line also have a certain technical requirements, not only to comply with the relevant provisions of the state, and different performance to meet different national standards, but also to manufacturers to choose, so as to ensure that we use the Line Pipes are qualified products.
 In the understanding of the above for the wire Line Pipe, the Line Pipe is mainly divided into two categories. And in this one, the cold Line Pipe is very long ago was banned use. Therefore, in the use of the situation, mainly with a hot Line Pipe to play a role. It is because of the rapid rise of construction and industry and other industries, so in this case, the use of wire is sought after by people.
First of all, in the galvanic Line Pipe is mainly in order to increase the service life of steel, which can be a good protection of steel pipe. In another case, such galvanizing technology has also played a crucial role in the development of wire Line Pipes. We understand the use of the line when the main, is to understand the main performance of the product has the market what kind of benefits.
In the use of the line is mainly to the user as a drain and a series of products, which depends mainly on its superior product performance, in which it has played a corrosive effect can not be ignored, and thus by the Manufacturers and users of all ages.
In the understanding of the above line, its technical requirements have become a curious question. Mainly because in the production process, people understand its basic principles, will be more of his approval. And this case, a brief introduction to its technical requirements, is conducive to us from all aspects of understanding of this product.
First of all, the line is mainly based on the user's use of the production. In order to better protect the steel pipe, so galvanized treatment. In the case of galvanizing, mainly by hot-dip galvanizing method for the main production. This process effectively ensures that when used, its life will be more lasting. On the other hand, the pipe is mainly based on the use of different elements of the production. Because the content of each element must be fixed, if there is deviation, it will make the product quality changes, and affect the user's use.
Line Pipe in life and some industrial production which has a very wide range of use, naturally brought us a lot of convenience, so we need to understand is how this product is better to buy, only the purchase is good for us to bring To better use the effect.
Line Pipe in the choice of the first time to note that the amount of carbon is how much, that is, according to their own use of a reasonable choice, different natural carbon hardness and plasticity and toughness are different, which is different The use of which the difference is also very large, and that is to pay attention to whether it is easy to process. Whether it is easy to process is the time when the processing is prone to brittle fracture of the situation, if it is very easy to appear brittle crack, then we choose the time or to pay more attention to the last choice is to pay attention to the life of the problem , If the life is too short, then believe that for us is naturally more trouble and waste of things。