Product Categories



Hebei Huike Steel Pipes Co., Ltd

Factory Location:

Xiwang New District, Mengcun,

Cangzhou, Hebei, China.

Tianjin Branch Office :

B-607,Hi-tech Information Square,Huatian Road 8#,

Huayuan Industry Park,Nankai District,Tianjin City,China


Contacts:

Mr . Hiram

Tel:+86-22-58900156

Fax:+86-22-58900165

M.P:+86-13381183522

E-mail:lihm@huikepipe.com

Web:www.hksteelpipe.com



Carbon Steel/Alloy Steel /Stainless Steel Eaqual and Reducing Pipe Tee

Carbon steel/Alloy steel/Stainless steel Seamless and welded PIPE TEE As a type of fittings, pipe tee comes into two shapes which are T-shapes and Y-shaped. It is usually installed at the intersection point of three pipelines. Our company provides various T-shaped tees, which include straight...

Product Details

Carbon steel/Alloy steel/Stainless steel Seamless and welded PIPE TEE

As a type of fittings, pipe tee comes into two shapes which are T-shapes and Y-shaped. It is usually installed at the intersection point of three pipelines. Our company provides various T-shaped tees, which include straight type and reducing type. Most tees on the market are welded onto the pipelines and then the welding joint need to be rubbed off. However, this is unacceptable in production process of pressure pipes. Our tees are produced by one-time forming, which perfectly solves the problem out. Our production process is upgraded and the processing time gets significantly reduced because we have cutting-edge techniques and advanced equipment. Further, better product quality and lower cost can be achieved.

Pipe Tee Standard:

GB/T12459-2005, GB/T13401-2005, GB/T10752-2005
SH/T3408-1996, SH/T3409-1996 SY/T0609-2006, SY/T0518-2002, SY/T0510-1998
DL/T695-1999, DL/T473-1992 GD2000 GD87-1101 HG/T21635-1987, HG/T21631-1990 ASME B16.9-2007, ASME B16.25-2007 MSS SP 75-2008, MSS SP 43-2008 CSA Z245.11-05-2005 EN10253-1-1999, EN10253-2-2007, EN10253-3-2008, EN10253-4-2008 DIN2615-1-1992, DIN2615-2-1992 BS1640-1-1962, BS1640-2-1962, BS1640-3-1968, BS1640-4-1968, BS1965-1-1963 GOST17376-2001 AFNOR NF A 49-289-1990, AFNOR NF A 49-170-1-1999, AFNOR NF A 49-170-2-2009, AFNOR NF A 49-170-3-2009, AFNOR NF A 49-170-4-2009 ISO3419-1981, ISO5251-1981 JIS B2311-2009, JIS B2312-2009, JIS B2313-2009

Available sizes range we can produce


     Reducing tee and Straight tee

DIMENSIONS

SEAMLESS TEE

WELDED/SEAMED TEE

OUTER DIAMETER

1/2"~32"

6"~60"

NOMINAL DIAMETER

15MM~800MM

150MM~1500MM

WALL THICKNESS

4MM~200MM

Pipe Tee Material :
Carbon steel: ASTM/ASME A234 WPB - WPC
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H
Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6
High-performance steel: ASTM/ASME A860 WPHY 42-46-52-60-65-70


Related Products
Inquiry